> For the complete documentation index, see [llms.txt](https://docs.incari.com/incari-studio/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.incari.com/incari-studio/2022.2/toolbox/communication/serial/serialstop.md).

# Serial Stop

## Overview

![The Serial Stop Node.](/files/QPEd17bpr7Q1RDADkxJP)

The **Serial Stop Node** stops the **Serial** connection.

**Serial Communication** in **Incari** is available as a plugin and is enabled as default. However, in the case that it is disabled in the **Plugins Editor**, it will not appear in the **Project Settings** and **Serial Stop** will not show up in the [**Toolbox**](/incari-studio/2022.2/toolbox/overview.md). Please refer to the [**Plugins Editor**](/incari-studio/2022.2/modules/plugins.md) to find out more information.

It is important to note that while the **Serial Stop Node** stops a **Serial** connection, it may not completely finish disconnecting from said connection when the **Node** is executed. This could lead to the **Logic** attached to its **Output Pulse** to not work even though there is technically nothing wrong. In order to avoid this, it is highly suggested to use the [**On Serial Stop Node**](/incari-studio/2022.2/toolbox/communication/serial/events/onserialstop.md) instead. This way, the **Logic** will only execute once the **Serial** connection has definitely been disconnected from. This way, it is assured that the **Logic** will execute once the connection to the **Serial** connection has been terminated.

Again, the user must first use the **Serial Stop Node** to close the connection. Separately, the **On Serial Stop Node** can be used to execute the desired **Communication Logic**.

![Serial Stop and On Serial Stop Configuration.](/files/wa8CnsDlqqlj9fHRmqPx)

[**Scope**](https://github.com/cgi-studio-gmbh/incari-doc/blob/2022.2/toolbox/communication/overview.md#scopes): **Project**, **Scene**.

## Attributes

![The Serial Stop Node Attributes.](/files/JFhV0pCtIxDV3FmeHPPe)

| Attribute       | Type          | Description                        |
| --------------- | ------------- | ---------------------------------- |
| `Configuration` | **Drop-down** | The desired **Serial** connection. |

## Inputs

| Input             | Type      | Description                                                           |
| ----------------- | --------- | --------------------------------------------------------------------- |
| *Pulse Input* (►) | **Pulse** | A standard **Input Pulse**, to trigger the execution of the **Node**. |

## Outputs

| Output             | Type      | Description                                                                                                                            |
| ------------------ | --------- | -------------------------------------------------------------------------------------------------------------------------------------- |
| *Pulse Output* (►) | **Pulse** | A standard **Output Pulse**, to move onto the next **Node** along the **Logic Branch**, once this **Node** has finished its execution. |

## See Also

* [**Serial Send Packet**](/incari-studio/2022.2/toolbox/communication/serial/serialsendpacket.md)
* [**Serial Start**](/incari-studio/2022.2/toolbox/communication/serial/serialstart.md)